INDO-MIM Placement Papers
 |
| INDO-MIM |
Online Test Paper of INDO-MIM Consists of Aptitude,Core Mechanical Technical Questions and Engineering Drawing Skill related Question
- 21 Core mechanical and 20 Aptitude questions with total of 41 marks to be completed in 45 minutes of time duration.
- Engineering drawing test consists of 3 Questions with 9 Marks having 15 mitues of time duration.
- Group discussion round.
- Technical and HR Interviews.
Placement and Interview Questions may asked in INDO-MIM:
Two students appeared at an examination. One of them secured 9 marks more than the other and his marks was 56% of the sum of their marks. What are the marks obtained by them?
a) 42, 33 b) 42, 36
c) 44, 33 d) 44, 36
2, 10, 40, 120,____
a) 240 b) 360
c) 470 d) 210
ELFA, GLHA, ILJA, _____, MLNA
a) OLPA b) KLMA
c) LLMA d) KLLA
If TAP is coded as SZO, then how is FREEZE coded ?
a) ATSSTS b) EQDDYD
c) ESDDYD d) EQDDZD
If in a certain language, COUNSEL is coded as BITIRAK, how is GUIDANCE written in that code?
a) EOHYZJBB b) FOIYZJBB
c) FOHYZJBB d) None of above
Siva Reddy walked 2 km west of his house and then turned south covering 4 km. Finally,He moved 3 km towards east and then again 1 km west. How far is he from his initial position?
a) 10 km b) 9 km
c) 2 km d) 4 km
If South-East becomes North, North-East becomes west and so on, what will West become?
a) North b) East
c) South-East d) North-West
a) Nephew b) Uncle
c) Either father or uncle d) Father
If X is the brother of the son of Y`s son, how is X related to Y ?
a) Son b) Brother
c) Grandson d) Cousin
Directions (Q 10 - 12) Study the following information carefully to answer these questions.
A. There are five friends.
B. They are standing in a row facing south.
C. Jayesh is to the immediate right to Alok.
D. Pramod is between Bhagat and Subodh .
E. Subodh is between Jayesh and Pramod.
10. Who is at the extreme left end ?
a) Jayesh b)Subodh
c)Alok d)Bhagat
11. Who is in the Middle ?
a) Bhagat b) Subodh
c)Jayesh d)Pramod
12. To find the answers to the above questions, which of the given statements can be dispensed with ?
a) None b) A only
c)B only d) C only
The sum of ages of 5 children born at the intervals of 3 years each is 50 years. What is the age of the youngest child?
a) 4 years b) 8 years
c) 10 years d) None of these
Sachin is younger than Rahul by 7 years. If their ages are in the respective ratio of 7 : 9, how old is Sachin?
a) 16 years b) 18 years
c) 28 years d) 24.5 years
Which of the following materials is most elastic
a) rubber b) plastic
c) brass d) steel
Railway rails are normally made of
a) mild steel b) alloy steel
c) high carbon d) tungsten steel
An example of amorphous material is
a) zinc b) lead
c) silver d) glass
The ratio of ultimate stress to design stress is known as
a) Elastic limit b) Strain
c) Factor of safety d) Bulk modulus
Which equation is used to determine wall thickness for brittle materials?
a) Brinie's equation b) Claviro's equation
c) Lame's equation d) All of the above
Residual stress in materials
a) acts when external load is applied b) becomes zero when external load is removed
c) is independent of external loads d) is always harmful
Within elastic limit, shear stress is __________ shear strain.
a) Equal to b) Less than
c) Directly proportional to d) inversely proportional to
What is composition of bronze?
a) Copper+Zinc b) Copper+Na
c) Copper+Ca d) Copper
The Thomson's turbine is __________ reaction turbine.
a) an axial flow b) an inward flow
c) an outward flow d)a mixed flow
The compression test is carried on __________ materials.
a) Ductile b) brittle
c) Malleable d) plastic
In case of pressure vessels having closed ends, the fluid pressure induces
a) Longitudinal stress b) circumferential stress
c) shear stress d) none of these
The factor which affects the critical speed of a shaft is
a) diameter of disc b)span of shaft
c) eccentricity d) all of these
When a nut is tightened by placing a washer below it, the bolt will be subjected to
a) tensile stress b) compressive stress
c) shear stress d) none of these
Resilience of a material is considered when it is subjected to
a) frequent heat treatment b) fatigue
c) creep d) shock loading
Two shafts A and B are made of the same material. The diameter of the shaft A is twice as that of the shaft B. The power transmitted by the shaft A will be …………………. of shaft B.
a) twice b) four times
c) eight times d) sixteen times
The unit of energy in S.I. units is
a) watt b) joule
c) joule/s d) joule/m
Hooke’s law holds good up to
a) yield point b) limit of proportionality
c) breaking point d) elastic limit
The yield point in static loading is ……………. as compared to fatigue loading.
a) higher b) lower
c) same d) none
The range of a projectile is maximum, when the angle of projection is
a) 30° b) 45°
c) 60° d) 90°
The ability of a material to resist softening at high temperature is known as
a) creep b) hot tempering
c) hot hardness d) fatigue
Rivets are made of following type of material
a) tough b) hard
c) resilient d) ductile
Aeroplanes employ following type of compressor
a) radial flow b) axial flow
c) centrifugal d) combination of above
Euler’s equation is applicable for
a) centrifugal compressor b) axial compressor
c) pumps d) all of the above
INDO-MIM Placement Papers
Reviewed by @NA
on
7:07:00 PM
Rating:
Reviewed by @NA
on
7:07:00 PM
Rating:
No comments: